In the current buildings, electric shutters are used more and more widely. Whether residential buildings or office buildings, most of them use electric shutters. Today, we will take you step by step to learn about electric shutters. I hope these contents are useful to you.

Construction of electric shutters

The drive system of the electric shutter is composed of a motor, a rope winder and a mechanical limiter. These components are installed in the bracket of C-type stainless steel, and become the finished products of electric blinds after assembly with the blinds. The assembled blinds system can be installed in the double-layer glass curtain wall or ceiling according to the design requirements in advance. The control mode of the system can adopt common wire control switch control, wireless remote control, wind and rain light control, timing control, building integrated control, etc.

Characteristics of electric louver

1. Stealth: When the blade is adjusted to 15 ° to 25 °, the room can not be seen from the outside, which has excellent stealth effect and can also promote indoor air convection circulation.

2. Daylighting: adjustable blades with shading of 0 ° to 105 ° can control indoor lighting and shading at will.

3. Ventilation: when the blade is adjusted to 90 degrees, the maximum vision and ventilation can be achieved.

4. Rain proof: It can effectively block the wind and rain.

5. Heat preservation, heat insulation and noise reduction: when the blades are closed, the window sash is in an airtight state, and the double-layer hollow design of the shutter tail can effectively maintain the indoor temperature and isolate the outdoor high temperature, and can reduce the noise by more than 30 decibels.

6. Fire protection: it can be linked with the fire control center as the automatic smoke exhaust and heat dissipation gate.

Jiangsu Rongshida Purification Technology Co., Ltd. not only has Electric Shutter Cleanroom Window, but also Handdade Sandwich Panel and other products. Welcome to visit our official website.